Application

N2XSEY type is used on fixed indoor and outdoor installations mostly in ducts, on cable trays, switch-boards and power stations. Suitable for limited underground installation, if there is possibility of damage on the outer sheath because of high mechanical stress. The inner conducting layer between the conductor and the XLPE and the firmly bonded outer conducting layer on the XLPE, assures a construction free of partial discharges with high operational reliability.

Cable structure

Technical data

CoresCircular bare copper conductor of stranded wires according to DIN VDE 0295 cl2 and IEC 60228 cl.2

Core insulation1st insulationInner semi-conducting coating2st insulationOf cross-linked compound (XLPE)DIX8 according to HD 620.13rd insulationOuter semi-conducting coating spliced with the XLPE insulation

WrappingConductive material

ScreeningCopper wires braiding in each conductor with one or two tapes applied helicallyThree cores are stranded. Extruded sheath over three cores

Outer sheathDMV6 according HD 405.1 and HD 405.1 andHD 620.1, in red color

SpecificationsDIN VDE 0276 according to IEC 60502

Temperature rangeDuring the installation up to -5ºCFixed installation up to +90ºC

Short circuit temperature+250ºC (up to 5 sec)

Nominal voltageUo/U 6/10 kV

Minimum bending radius15 x cable Ø